Thermal Effect on Buckling of General Dome Ends Using Finite Element Method
In this study,the elastic buckling behavior of general dome ends under presumed temperature distribution and external pressure was studied.The Finite Element Method (FEM) was used to predict the elastic buckling pressure behavior when the domes were subjected to various operating temperatures.The freedom of the edges of the dome ends was completely restricted to simulate clamped end conditions.The four-centered ellipse method was used to construct the geometry of the dome ends.The influence of geometrical parameters such as thickness,knuckle radius,and the ratio of minor axis to the major axis of dome ends and the effect of temperature on critical buckling pressure of hemispherical,ellipsoidal,and torispherical dome ends were studied.It has been found that the under thermal condition,the thickness and the shape of the domes have the most significant effect on the critical buckling pressure.Two models of torispherical and ellipsoidal dome ends are analyzed by using finite element analysis.
Four-Centered Ellipse Method Todspherical Hemispherical Ellipsoidal Buckling Pressure External Pressure Finite Element method
Behzad Abdi Hamid Mozafad Amran Ayob Roya kohandeld
Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, UTM Skudai, Johor, Malaysia Faculty of Civil Engineering, Universiti Teknologi Malaysia, UTM Skudai, Johor, Malaysia
国际会议
台湾
英文
340-345
2011-12-11（万方平台首次上网日期，不代表论文的发表时间）