Adhesive Bond Discrepancies Identification with Hybrid Dynamic Parameter Method

摘要：

　　With the implementation of crash-toughened adhesives in automotive industry,adhesive bonding has become one effective joining technology instead of resistance spot welding especially for AHSS materials because of its better fatigue performance and greater flexibility.However,while chisel test has been widely used for resistance weld inspection,no practical inspection method is available for adhesive bond discrepancies identification.The inspection method we need for use in a high-volume,low-cost production environment should be fast,convenient,nondestructive,cost-effective,and able to effectively assure some minimum acceptable level of joint quality.The method we finally conducted was based on the weld-bonding process of different adhesive bonding joints by acquiring and analyzing the dynamic welding parameters signal curves such as the electrode displacement and dynamic resistance from different sensors installed onto the welding gun.Based on the integrated inspection system,lots of experiments and analysis showed that this inspection method is basically feasible,that is,it could identify different adhesive bond discrepancies qualitatively and accurately.Especially,the on-line inspection is conducted before the complete curing of joints in paint shop.If the inspection results are nonideal and some discrepancies are detected,the further repairing work is much easier and cost-effective.So the inspection method has a good potential especially applied in production line.The findings in this study provide the guidelines for using adhesive bonding AHSS materials in automotive industry.

关键词： Adhesive bond Discrepancies identification Hybrid dynamic parameter method Dynamic electrode displacement Dynamic resistance

作者: Xin Zhao Xinmin Lai Yansong Zhang Guanlong Chen P.C.Wang

作者单位: The Auto-Body Manufacturing Technology Center(BMTC), Institute of Automotive Engineering,School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China

会议类型: 国际会议

会议名称: the Second International Conference on Frontiers of Manufacturing and Design Science(第二届制造与设计科学国际会议(ICFMD 2011))

会议地点: 台湾

会议语种:英文

页码: 1239-1243

在线出版日期: 2011-12-11（万方平台首次上网日期，不代表论文的发表时间）