Study on Ware Resistance of Laser Hardening Rolling Mill Liner

摘要：

　　In order to change the traditional status that rolling mill liner can not be manufactured with a single material,laser transformation hardening was carried out by HL-1500 cross-flow CO2 laser processing machine on 45 steel surface.developed a non-composite liner instead of the original.The microstructure and properties were researched by means of scanning electron microscopy,X-ray diffractometer,microhardness tester and abrasive wear testing machine.The result indicate that,the microstructure of laser transformation hardening layer fine and homogeneous,mainly composed of Fe,Fe3C,Fe-Cr and Cr3C2,the hardness and the relative wear resistance are about 3 times and 2.7times as that of the substrate respectively; which can reached the technical requirements liner needed.

关键词： Laser hardening Rolling mill liner Microstructure Microhardness Ware resistance

作者: Xingwu Qiu Yunpeng Zhang Chunge Liu

作者单位: School of Materials Science and Engineering, Xian university of Technology,Xran, Shanxi, 710048, Ch School of Materials Science and Engineering, Xian university of Technology,Xran, Shanxi, 710048, Ch Department of Traffic & Municipal Engineering, Sichuan College of Architectural Technology,Deyang, S

会议类型: 国际会议

会议名称: the Second International Conference on Frontiers of Manufacturing and Design Science(第二届制造与设计科学国际会议(ICFMD 2011))

会议地点: 台湾

会议语种:英文

页码: 3551-3554

在线出版日期: 2011-12-11（万方平台首次上网日期，不代表论文的发表时间）