会议专题

Tailoring Plate-like Grained ZrB2 Ceramic via a Strong Magnetic Field Alignment Method Followed by Spark Plasma Sintering

  Through strong magnetic field alignment (SMFA) method followed by spark plasma sintering (SPS),dense tailored ZrB2 ceramic could be prepared using the plate-like grains as initial material.The measured Lotgering orientation factor f(00(l)) on the textured top surface (TTS) was high as 0.62 and f(hk0) on the textured side surface (TSS) was 0.65.Vickers hardness measurement showed the anisotropic mechanical property of textured sample.On the TTS,the hardness was 13.4 ± 0.9 GPa,while on the TSS the hardness was 12.0 ± 0.9 GPa.

ZrB2 Plate-like grain Tailoring Spark plasma sintering

Chun Feng HU Qing Huang Guo Jun Zhang Yoshio Sakka

Ningbo Institute of Material Technology and Engineering,Chinese Academy of Sciences,Ningbo 315201,Ch Ningbo Institute of Material Technology and Engineering,Chinese Academy of Sciences,Ningbo 315201,Ch State Key Laboratory of High Performance Ceramics and Superfine Microstructures,Shanghai Institute o Advanced Materials Processing Unit,National Institute for Materials Science,Tsukuba,Ibaraki 305-0047

国际会议

The Seventh China International Conference on High-Performance Ceramics (第七届先进陶瓷国际研讨会(CICC-7))

厦门

英文

702-705

2011-11-04(万方平台首次上网日期,不代表论文的发表时间)