Preparation and Properties of Porous Si3N4/SiO2/BN Composite Ceramics
Porous Si3N4/SiO2/BN composite ceramics with high strength and low dielectric constant were prepared by dry-pressing process and pressureless sintering at 1750℃ for 1.5 h in flow nitrogen.The influences of BN content on microstructure,porosity,mechanical and dielectric properties of the porous Si3N4/SiO2/BN composite ceramics were discussed.The results showed that the porous Si3N4/SiO2/BN composite ceramics with porosity ranging from 29% to 48% were fabricated by adjusting the content of BN.The flexural strength of the porous Si3N4/SiO2/BN composite ceramics was 78~215 MPa.The dielectric constant of the porous Si3N4/SiO2/BN composite ceramics was 3.9~5 at 1 MHz.
Si3N4/SiO2/BN Porous ceramic Dielectric properties Flexural strength
Wei Dong Chang-An Wang Lei Yu Shi-Xi Ouyang
China Building Materials Academy,Beijing 100024,China;State Key Lab of New Ceramics and Fine Process State Key Lab of New Ceramics and Fine Processing,Department of Materials Science and Engineering,Ts State Key Lab of New Ceramics and Fine Processing,Department of Materials Science and Engineering,Ts China Building Materials Academy,Beijing 100024,China
国际会议
The Seventh China International Conference on High-Performance Ceramics (第七届先进陶瓷国际研讨会(CICC-7))
厦门
英文
828-831
2011-11-04(万方平台首次上网日期,不代表论文的发表时间)