The Influence of RuO2 Addition on the Thermoelectric Properties of BiSbTe Alloys
P-type BiSbTe/RuO2 composite was fabricated using a combined process of melting and spark plasma sintering.The XRD patterns showed that RuO2 have reacted with the BiSbTe for the samples with 1.0 wt% and 4.0 wt% RuO2.The measured thermoelectric properties showed that the highest electrical conductivity was obtained for the sample with 2.0 wt% RuO2.The power factor (α2σ) decreased with the increase of RuO2 below 450 K.The lattice thermal conductivity was lower than that of BiSbTe over the whole temperature range for BiSbTe/2.0 wt% RuO2.
Bismuth antimony telluride RuO2 Thermoelectric Properties Spark Plasma Sintering
Yukun Xiao Zhixiang Li Jun Jiang Shenghui Yang Ting Zhang Yongbiao Zhai Gaojie Xu
Ningbo Institute of Material Technology & Engineering,Chinese Academy of Science,No.519 Zhuangshi Road,Zhenhai District,Ningbo,315201,P.R.China
国际会议
The Seventh China International Conference on High-Performance Ceramics (第七届先进陶瓷国际研讨会(CICC-7))
厦门
英文
1651-1654
2011-11-04(万方平台首次上网日期,不代表论文的发表时间)