Temper and Wear Resistance of Wide-Band Laser Cladded WC Coating

摘要：

　　High power continuous wave (CW) CO2 laser cladding was performed on H 13 steel,precoated by superfine WC.After laser cladding,the materials were tempered for 6 hours.Scanning electronic microscopy (SEM) was used to observe the morphologies of the cladding layer.X-ray diffraction (XRD) was employed to analyze the microstructure of the cladding layer.The changes of microhardness,temper resistance and wear resistance were tested.The microhardness of cladding layer before tempering was 1.4 times of that of base metal and 1.9 times after tempering at 500℃.The wear resistance and tempering resistance were improved.

关键词： Laser cladding WC H13 Temper resistance Wear resistance

作者: Fanzhi Kong Xiaodong Hu Jianhua Yao Chenghua Lou

作者单位: Key Laboratory of Special Purpose Equipment and Advanced Processing Technology(Zhejiang University of Technology), Ministry of Education, Hangzhou, 310014, P.R.China ;Engineering Research Center of Process Equipment and Its Re-manufacturing Ministry of Education, Hangzhou, 310014, P.R.China

会议类型: 国际会议

会议名称: the 2010 International Conference on Frontiers of Manufacturing and Design Science(第一届制造与设计科学国际会议(ICFMD 2010))

会议地点: 重庆

会议语种:英文

页码: 4157-4161

在线出版日期: 2010-12-11（万方平台首次上网日期，不代表论文的发表时间）