Dynamic Mechanical Properties of CNTs/MoSi2 Composite Material
Carbon nanotubes (CNTs) are good reinforcement of composite materials,through add appropriate amount of carbon nanotubes to MoSi2 can be improve the strength and toughness of MoSi2.In this paper,the material of CNTs/MoSi2 was made through vacuum hot pressing technology.And the split hopkison press bar (SHPB) technology was used for testing the dynamic mechanical properties of CNTs/MoSi2 composite material which has different proportion of CNTs.In the SHPB experiment,in order to get better waveforms,the waveform shaping technology was used for improving the waveform quality,and also the strain gauge technology was used for testing the real strain of the specimen in the dynamic loading process.Through calculating,the dynamic stress-strain curves which under different high strain rate are given.At the same time,the strength,deformation and other test results are analyzed,and also compared them with the static compression experiment results of the CNTs/MoSi2 specimen which is tested by the electronic universal testing machine,and then obtained the dynamic performance of CNTs/MoSi2 composite material.
Carbon nanotubes MoSi2 SHPB Dynamic mechanical properties
Zou Guangping Chang Zhongliang Qiao Yingjie
College of Aerospace and Civil Engineering, Harbin Engineering University, Harbin 150001, China College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001,
国际会议
The Sixth China International Conference on High-Performance Ceramics(第六届中国先进陶瓷国际研讨会(CICC-6))
哈尔滨
英文
75-78
2009-08-16（万方平台首次上网日期，不代表论文的发表时间）