Synthesis,Characterization and Electrical Properties of Barium Titanate Films Fabricated by Hydrothermal Method
BaTiO3 films with a thickness up to 3 μm were fabricated under the hydrothermal conditions.It was found that the crystallinity of BaTiO3 increases with the concentration of Ba(OH)2 solutions.Along with the increasing of time,the crystallinity of BaTiO3 increases,reaches the maximum value and then decreases.The measured values of remanent polarization (Pr) and coercive field (Ec) are 1.74pC/cm2 and 24KV/cm.The leakage of the films at 1V is 10-7m/cm2.The dielectric constant and loss tangent of hydrothermal derived BaTiO3 film at a frequency of 1 KHz were 600 and 0.2,respectively.
Barium titanate Hydrothermal method
Jianling Zhao Xiaohui Wang Longtu Li Xixin Wang Yangxian Li
School of Material Science and Engineering,Hebei University of Technology,Tianjin 300130,China;State State Key Lab of New Ceramics and Fine Processing,Department of Materials Science and Engineering,Ts School of Material Science and Engineering,Hebei University of Technology,Tianjin 300130,China
国际会议
The Fifth China International Conference on High-Performance Ceramics (第五届先进陶瓷国际研讨会(CICC-5))
长沙
英文
47-49
2007-05-10(万方平台首次上网日期,不代表论文的发表时间)