Optical Properties and Microstructure of Mn:MgAl2O4 Transparent Ceramic after HIP Treatment
5.0at% and 10.0at% Mn-doped MgAl2O4 transparent ceramics have been prepared through vacuum sintering (1750℃/2h) and subsequent hot isostatic pressing (HIP) (1650℃/2h).The effect of microstructure on the light transmittance of the sintered MgAl2O4 is discussed.Results showed that the grains became dense and grain boundary became clear and most of pores inside and between grains were removed,so the transmittance of two samples increased.The optical transmittance of the 5.0at% specimens was increased by one times in the visible light wavelength region.HIP treatment has a great effect on improving the transparency of samples with low doping concentrations.
Mn:MgAl2O4 Hot isostatic pressing Microstructure Optical properties
Yuefeng Sun Tiecheng Lu Xuejun Wang Muyun Lei Cunxin Huang
Department of Physics and Key Laboratory of Radiation Physics and Technology of Education Ministry,S Department of Physics and Key Laboratory of Radiation Physics and Technology of Education Ministry,S Research Institute of Synthetic Crystals,Beijing 100018,China
国际会议
The Fifth China International Conference on High-Performance Ceramics (第五届先进陶瓷国际研讨会(CICC-5))
长沙
英文
417-419
2007-05-10(万方平台首次上网日期,不代表论文的发表时间)