会议专题

Dielectric Performance of Alumina Ceramics Sintered at Different Temperatures

  This paper investigated the influence of sintering temperature on the dielectric performance of alumina ceramic.Three different kinds of alumina ceramic samples were prepared using the same formula with three different sintering temperatures.The flashover voltage and surface charge distribution of the test samples were measured with a finger type electrode system under a positive pulse voltage application in a 1 × 10-4Pa vacuum circumstance.The experimental results showed that the samples with higher sintering temperature have worse dielectric performance.Based on the SEM observation,the change of dielectric performance could be attributed to the change ofmicrostructure of alumina ceramics.

Alumina Ceramics Dielectric performance Surface charge Flashover voltage

Lijian Ding Youping Tu C.R.Li Jingchun Wang

Beijing Key Laboratory of High Voltage and EMC,North China Electric Power University,Beijing 102206,PR China

国际会议

The Fifth China International Conference on High-Performance Ceramics (第五届先进陶瓷国际研讨会(CICC-5))

长沙

英文

659-662

2007-05-10(万方平台首次上网日期,不代表论文的发表时间)