Si3N4-BN-SiO2 Based Microwave-Transparent Materials
The Si-B-O-N microwave-transparent materials were prepared by gas pressure sintering (GPS).The effect of BN and nano-SiO2 contents on the mechanical and dielectric properties of the composites was studied.The microstructural characteristic and reinforced mechanism of the composites were also investigated.The results showed that a series of Si-B-O-N wave-transparent materials could be obtained by controlling the contents of raw materials and technological parameter,The bending strength of composites is from 74.7MPa to 174.83MPa,the dielectric constant is from 3,5 to 4.2 and the tangent of loss angle is from 0.5× 10-3 to 4.5×10-3.
Microwave-Transparent Composites Silicon nitride Boron nitride Dielectric constant
Zhang Weiru Wang Chonghai Li ling Liu Jian Chen Wen
Material School,Wuhan University of Technology,Wuhan 430070,China;Shandong Research & Design Institu Shandong Research & Design Institute of Industrial Ceramics,Zibo 255031,China Material School,Wuhan University of Technology,Wuhan 430070,China
国际会议
The Fifth China International Conference on High-Performance Ceramics (第五届先进陶瓷国际研讨会(CICC-5))
长沙
英文
913-916
2007-05-10(万方平台首次上网日期,不代表论文的发表时间)