Wear Properties of Basalt Fibers Reinforced Composites
Compared to traditional fiberglass,basalt fibers have a wide spectrum of applications used as textile fiber or reinforcement for composites.Epoxy resin composites filled with basalt fibers were prepared by proper curing,using KH-550 silane coupling agent to enhance the interfacial bonding between the inorganic reinforcing agent and the polymer matrix.The milling abrasive wear was investigated in slurry containing sand abrasive particles using milling equipment.The experimental results indicated that basalt fibers,EP and the nano-sized SiO2 filling formed steady composites.The wear rate of the sample was reduced with the increase of resin content before the content of resin amounted to 40%.When the content of resin is more than 40%,the wear rate of the sample deceased slightly.
Basalt fiber Composites Wear
Xin Shao-bo Liang Xiao-ping Liu Hua-wu Zhong Zhi-li
Tianjin Municipal Key Lab of Fiber Modification and Functional Fiber,Tianjin Polytechnic University, School of Textile Engineering,Tianjin Polytechnic University,TianJin 300160,PR China
国际会议
The Fifth China International Conference on High-Performance Ceramics (第五届先进陶瓷国际研讨会(CICC-5))
长沙
英文
1010-1012
2007-05-10（万方平台首次上网日期，不代表论文的发表时间）