会议专题

Online-Joining of C/SiC-C/SiC via Precursor Infiltration and Pyrolysis Process

  A novel,online-joining of C/SiC-C/SiC method,precursor infiltration and pyrolysis,was used to obtain high temperature stable joining SiC composition,while joining process was highly consistent with C/SiC preparation process.The compositions of joining ingredients and process parameters were investigated to determine the maximum joining strength of C/SiC-C/SiC at room and high temperatures.The optimum weight ratio of (polycarbosilane/divinyl benzene)/SiC powder is 3/1,and ramping rate of pyrolysis is 2℃/min,and cycles of infiltration and pyrolysis is 6.The flexural strengths of joining components remained stable up to 1200℃ (50.8MPa),but decreased to 30.5MPa at 1500℃,while the tensile strengths remained rather stable (20.5MPa) up to 1500℃,and decreased to 8.4MPa at 1800℃.

Online-joining Joining strength Precursor infiltration and pyrolysis

Yangwei Lu Yudi Zhang Haifeng Hu Changrui Zhang

CFC Lab,College of Aerospace and Materials Engineering,National University of Defense Technology,Changsha 410073,P.R.China

国际会议

The Fifth China International Conference on High-Performance Ceramics (第五届先进陶瓷国际研讨会(CICC-5))

长沙

英文

1044-1046

2007-05-10(万方平台首次上网日期,不代表论文的发表时间)