Tribological Performance of Ultra-hard Ceramic Composite Coatings Obtained through the Microplasma Oxidation
Ceramic oxidation coating of approximately 60 μm thick was prepared on a Ly12 alloy substrate by micro-plasma oxidation in an alkali-silicate electrolytic solution.Coating thickness was measured during coating formation.The influence of current density,electrolyte temperature and inter-electrode distance on coating kinetics was investigated.Microstructure and phase compositions were analyzed.The micro-hardness of the coating was also measured.The tribological performance of the coatings was evaluated using a dry sand abrasion test.In addition,the results are compared to detonationsprayed alumina coating.
Ceramic oxidation coatings Tribological performance Microplasma oxidation
Shuha Li Fuchi Wang Yujun Yin Runze Yang Chengwen Tan
Ordnance Engineering college,ShiJiazhuang 050003,Hebei,China;School of material science and engineer School of material science and engineering,Beijing institute of technology,Beijing 100081,China Ordnance Engineering college,ShiJiazhuang 050003,Hebei,China
国际会议
The Fifth China International Conference on High-Performance Ceramics (第五届先进陶瓷国际研讨会(CICC-5))
长沙
英文
1271-1273
2007-05-10(万方平台首次上网日期,不代表论文的发表时间)