On the Microstructure of Aluminum Titanate Powders Coated with Mullite Sol
The mullite sol was prepared using tetraethyoxysilane (TEOS) as raw materials.Aluminum titanate (AT) powders were coated with the sol by dipping.The influence of the concentration of the mullite sol and pH value on the microstructure of the coated AT powders was studied.The results showed that AT powders are coated homogeneously and the thickness of the mullite film is about 0.15 μm when the concentration of the mullite sol is 0.18 mol.L-1 and pH value is 3.0.
Sol-gel Mullite Aluminum titanate Dipping
Zhou Jianer Hu Xuebing Li Huili Wang Yanxiang Wang Yongqing Zhang Xiaozhen
University Key Laboratory of Inorganic Membrane in Jiangxi Province,Jingdezhen Ceramic Institute,Jingdezhen 333001,China
国际会议
The Fifth China International Conference on High-Performance Ceramics (第五届先进陶瓷国际研讨会(CICC-5))
长沙
英文
1380-1382
2007-05-10(万方平台首次上网日期,不代表论文的发表时间)