Fabrication of TiO2 Nanotubes Array by Anodization for DSSC
TiO2 nanotubes array was fabricated by anodization.Effect of reaction duration on the morphology of TiO2 nanotube arrays was studied detailedly.The structure and morphology of the prepared nanotubes array was characterized by X-ray diffraction and scanning electron microscopy,respectively.The fabricated TiO2 arrays were peeled off and adhered to FTO glass with adhesive (mixture of tetrabutyl titanate and polyethylene glycol),then they were sintered at 450℃ for photoanode of DSSC.The photovoltaic performance of the prepared sample as the DSSC anode was investigated.An open circuit voltage of 0.69V and a short circuit current density of 7.78mA/cm2 were obtained,and the fill factor and the convert efficiency were 0.517 and 2.78%,respectively.
Anodization TiO2 nanotubes array DSSC
Hongzhou Yan Junyou Yang Shuanglong Feng Ming Liu Jiangying Peng Jiaqi Zhang Weixin Li
State Key Laboratory of Material Processing and Die & Mould Technology Huanzhong University of Science and Technology, Wuhan 430074, P.R Chian
国际会议
the Chinese Materials Congress 2012(2012年中国材料大会(CMC2012))
太原
英文
920-925
2012-07-13（万方平台首次上网日期，不代表论文的发表时间）