Study on the Preparation and Properties of Epoxy/PEI/nano-attapulgite Nanocomposites
Polyether imides (PEI) and nano-attapulgite particles organically synthesized by the active silane containing epoxide groups (OAT) were used to modify the epoxy resin (ER).The effect of the concentration of OAT on the morphology,thermal and mechanical properties of ER/PEI/OAT nanocomposites was explored in the present work.The microscopic structure of nanocomposites was investigated by Scanning electric microscopy (SEM).The results showed that a homogeneous nano-attapulgite organically-modified by silane in the polymeric matrix was obtained.SEM images showed that the morphology transformation increased with the increase of OAT content,which would lead the improvement of the impact strengths of nanocomposites.The results of mechanical and thermal measurements indicated that the introduction of PEI and OAT into the epoxy resulted in the great improvement of the impact strength and storage module.With the OAT concentration increasing,the glass translation temperature (Tg) value of nanocomposites was gradually increased.Additionally,the results of thermo-gravimetric analysis (TGA) revealed that thermal stability of nanocomposites was apparently improved in comparison to the epoxy resin systems.
Attapulgite Nanocomposite Epoxy resin Modification
Changxiu Fan Jingkuan Duan Ya Li Shuangxi Shao Peide Han
Department of Materials Science and Engineering Taiyuan University of Technology, Taiyuan 030021, Ch Institute of Material Engineering of Ningbo University of Technology, Ningbo 315016, China
国际会议
the Chinese Materials Congress 2012(2012年中国材料大会(CMC2012))
太原
英文
341-351
2012-07-13（万方平台首次上网日期，不代表论文的发表时间）