会议专题

Study on the Sintering Mechanism of Tin Oxide Ceramics Doping with Pr2O3

  The Pr2O3 doped SnO2 dense ceramic was prepared by co-precipitation method and further sintering.Through the micrograph of the cross-sectional microstructure of the electrodes,the sintering process was analyzed and discussed.Results showed that the solid phase sintering was exhibited at the early stage;when sintering was kept going on,the instant liquid phase could be emerged due to the rich dopants in the grain boundary.Finally,there would be much secondary phase existe as the concentration of dopants reached to a certain value.

Sintering mechanism Ceramics Tin Oxide Rare earth Secondary phase

Qingwei Wang Hongzhi Wang Wei Ning Lida Luo

Engineering Research Center of Advanced Glasses Manufacturing Technology, MOE, Donghua University, S College of Material Science & Engineering of Donghua University, Shanghai 201620 China

国际会议

the Chinese Materials Congress 2012(2012年中国材料大会(CMC2012))

太原

英文

512-516

2012-07-13(万方平台首次上网日期,不代表论文的发表时间)