会议专题

Effect of Ni on Microstructure and Mechanical Properties of Bulk Nanocrystalline Fe-Al Based Alloys Prepared by Aluminothermic Reaction

  Bulk nanocrystalline Fe-Al based alloys with 5,10 and 15 wt.% Ni were prepared by aluminothermic reaction.The alloys were analyzed by electron probe microanalyzer,X-ray diffraction and transmission electron microscope.Compressive yield strength and hardness of the alloys were tested.The experimental results showed that all of the alloys consisted of Fe-Al-Ni matrix and small amount of Al2O3 sphere.The matrix phases of the alloys with 5 and 10 wt.% Ni had disordered α-Fe solid solution,while the matrix phases of the alloys with 15 wt.% Ni had disordered α-Fe solid solution,NiAl phase and Fe3AlCx phase.Average grain sizes of the matrix phases of the alloys were about 20 nm.The alloys with 5 wt.% Ni had the best plasticity,but the alloys with 15 wt.% Ni had the highest yield strength and hardness.Yield strength of those alloys is higher than that of coarse-grained Fe3Al.

Mechanical properties Bulk nanocrystalline Aluminothermic reaction

Peiqing La Yupeng Wei Yang Yang Hongding Wang Yaping Bai

State Key Laboratory of New Nonferrous Materials, Lanzhou University of Technology,Lanzhou, 730050, China

国际会议

the Chinese Materials Congress 2012(2012年中国材料大会(CMC2012))

太原

英文

715-721

2012-07-13(万方平台首次上网日期,不代表论文的发表时间)