Numerical Simulation and Process Optimization of Directional Solidification of Nb Containing High Silicon Steel
Fe-6.5%Si alloy is an excellent soft magnetic material.However,the industrial production of this sheet was difficult,due to its room temperature brittleness.In order to improve its deformation performance,the directional solidification and inhibitor of Nb were investigated in this study.Rod samples of ?6.8 mm×100 mm were used both for modeling and experiments.ProCAST-finite element analysis was employed for the modeling with a temperature gradient of 1150K/cm (from 1450°C to 300°C) for directional solidification and the drawing velocities of 10,35,60,and 100?m/s.Calculations were carried out on the concerning temperature gradient,solidification rate and grain growth.The results showed that small amount of Nb,with optimized drawing velocity of 60?m/s was helpful for the homogeneity of grain size,which could improve the ductility for subsequent deformation processes.
High silicon steel Directional solidification ProCAST simulation Nb containing
Kun Yang Feng Ye Yongfeng Liang Junpin Lin
State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China
国际会议
the Chinese Materials Congress 2012(2012年中国材料大会(CMC2012))
太原
英文
31-37
2012-07-13（万方平台首次上网日期，不代表论文的发表时间）