会议专题

Evaluation of Inclusions in P/M Superalloy

  The non-metallic inclusions in master alloy,P/M superalloy and HIP powder billet were studied in this paper.The results show that the amount of inclusions in master alloy is higher than that of the superalloy powers.The EB-button analysis shows that the main non-metallic inclusions in both the master alloy and the HIP powder billet is Al2O3.The amount of the inclusion in master alloy is about 0.166cm2/kg and the size of most inclusions is in the range of 100μm to 200μm,while the maximum inclusion size reaches 400μm.In the P/M superalloy billet,the content of inclusion is only 0.01cm2/kg and the size of most inclusions is less than 50 μm.

P/M superalloy Non-metallic inclusion EB-button

Hua Yuan Zhou Li Guoqing Zhang Wenyong Xu Na Liu

Science and Technology on Advanced High Temperature Structural Materials Laboratory,Beijing Institute of Aeronautical Materials, Beijing 100095, China

国际会议

the Chinese Materials Congress 2012(2012年中国材料大会(CMC2012))

太原

英文

513-517

2012-07-13(万方平台首次上网日期,不代表论文的发表时间)