Pin-on-disc wear test and simulation of HA/ZrO2 composite coating
HA/ZrO2 composite coating was prepared on the titanium alloy substrate with optimized plasma spraying parameters, and its wear rate was measured with pin-on-disc tester. The wear rate models during running-in and stable period were built basing on uniform design theory and the quadratic polynomial stepwise regression analysis method. Wear simulation for pin-on-disc sliding wear test was conducted with ANSYS contact analysis and wear rate model. The results showed that the regression equations could be obtained, and the simulation results were quite consistent with the experiments. The contact pressure distribution was affected by the continuously changing model in the wear zone during wearing. Wear weight and depth increased almost linearly during both running-in and stable wear period.
Hydroxyapatite composite coating Wear simulation Uniform design theory Finite element method
Lei Wu Yumei Bao Dongming Zhang Guozhong Chai
Zhejiang Provincial Key Laboratory of Special Purpose Equipment and Advanced Processing Technology,H Zhejiang Provincial Key Laboratory of Special Purpose Equipment and Advanced Processing Technology,
国际会议
2012 International Symposium on Structural Integrity 2012国际结构完整性学术研讨会 ISSI 2012
济南
英文
395-398
2012-10-31（万方平台首次上网日期，不代表论文的发表时间）