Analysis on Progressive Slipping-Shear Failure Mode of Bedding Slope of Hard Rock with Medium or Large Dip Angle
Kala Hydropower Station is located in the midstream of Yalong River in Sichuan Province of China, and the type of dam is concrete gravity dam, with a largest dam height of 129 m, an installed capacity of 1000 MW and a storage capacity of 255.8 million cubic meters. The slope on the right bank of the dam site is mainly composed of hard metasandstone and marbles interbedded with carbonaceous slates and the dip of rock formation is the same as the aspect of slope, so that it is a typical bedding slope. The field survey indicates that the failure of bedding slope of hard rock is not on a common mode of slipping-bending or buckling, but on an uncommon failure mode. The paper introduces a research method that starts with geologic history, analyzes current state and predicts the future failure mode, analyzes the characteristics and phenomenon of slope failure, and adopts the finite element calculation method to analyze the plastic zone resulting from slope deformation. According to the deformation evidence and calculation results, the engineering geologic mechanical theory is used to analyze the deformation and failure mode of slope, and it is indicated that the current and future failure modes of hard rock slope with large thickness are all slipping-shear failure.
Bedding Slope Failure Mode Slipping-Shear Failure Yalong River China
WEI Yufeng NEI Dexin
State Key Laboratory of Geohazard Prevention and Geoenvironment Protection (Chengdu University of Technology),Chengdu 610059, China
国际会议
三峡
英文
2177-2181
2012-05-18（万方平台首次上网日期，不代表论文的发表时间）