会议专题

Optical Design of a Line Scanning Laser Ophthalmoscope

The paper describes the optical design of a line scanning laser ophthalmoscope (LSO). A line beam is used to illuminate the retina,meanwhile a linear array sensor is used for imaging the retina. For the Liou & Brennan eye model,we set the pupil diameter to be 2 mm,and the field of view is 6 degree on retinal plane (about 1.8 mm × 1.8 mm). ZEMAX optical modeling analysis shows that the main optical system achieves diffraction limit through the entire scanning angle. The magnification of the optical system is about 7 times,and the transverse resolution is less than 10 μm. For our 512 × 512 pixels imaging mode (the sensor line frequency is 98 KHZ),the frame frequency can achieve 200 fps.

optical design LSO line scanning

Yi He GuoHua Shi Jing Lu Hao Li Yudong Zhang

The Key Laboratory on Adaptive Optics,Chinese Academy of Sciences,Chengdu 610209,China The Laborator The Key Laboratory on Adaptive Optics,Chinese Academy of Sciences,Chengdu 610209,China The Laborator The Key Laboratory on Adaptive Optics,Chinese Academy of Sciences,Chengdu 610209,China The Laborator

国际会议

2011 International Conference on Opto-Electronics Engineering and Information Science(2011光电电子工程与信息科学国际会议 ICOEIS 2011)

西安

英文

812-816

2011-12-23(万方平台首次上网日期,不代表论文的发表时间)