Control and Characterization of Materials Recovered from Mechanical Recycling of Waste Refrigerators
The recycling of e e-waste in general allows the recovery of valuable materials, which can be reused as secondary raw materials. T This implies, however his however, to adopt reliable treatment processes to achieve specific standard characteristics. Actually, the market standards are very strict and strongly affect the economic value of recovered materials. In particular, waste refrigerators recyc recycling allows ling the recovery of different plastic materials together with metallic fractions (ferrous and non ferrous), which economic value is considerably increasing in the last years. Only in Italy, in 2010 approximately 66 66,000 t of waste refrigerators were collected for recycling. An efficient recycling treatment could assure about 85％ of recovery rate. In this paper, a model to control and characterize the materials recovered from mechanical recycling of cabinets dismantled from of waste refrigerators is p proposed. The treatment flow sheet consists of various separation and comminution operations. A roposed. mathematical model was implemented to determine a partition function, utilizing data obtained from the treatment of 100 waste refrigerator carcasses carcasses, carrying ou , out mass balance of recovered materials. The partition function was adopted to determinate control parameter to assess the quality of the recovered products, and, therefore, of the applied technologies. The results shown as the best recovered products, and, therefore, of the applied technologies. The results shown as the best recovery rate of waste re refrigerator frigerator carcasses were reached for ferrous metals (97.5％) together with high purity (more than 98％). Also other metals reached a good quality (about 87％ for non non-ferrous metals, 92％ for mixed recyclable plastics), but with lower recovery rates.
Material Control and Characterization Mechanical Recycling Waste Refrigerators.
Floriana La Marca
Department of Chemical Engineering, Materials & Environment, epartment University of Rome “La Sapienza Sapienza, Via Eudossiana, 18 – 00184 Rome, Italy
国际会议
上海
英文
207-211
2011-10-27（万方平台首次上网日期，不代表论文的发表时间）