The High Frequency Pulse Effect and Verification in the Welding Process for High-Strength Aluminum Alloy
The plate butt welding tests have been carried out to the 2219 high-strength aluminum alloy material by utilizing the self development compound high frequency pulse TIG power source, whose results show that the mechanical properties of the welding seam may be effectively enhanced by adding the high frequency pulse energy. Therefore, a acoustic emission sensing system was established to acquire the transmission effect of the high frequency pulse arc energy during the welding process; moreover, the influence on the welding seam microstructures by the compound high frequency pulse energy has been studied. The results show the following effects: the porosity number at the both sides of the welding seam fusion line may be decreased significantly by adding the high frequency pulse energy; The analysis to the high frequency pulse action mechanism has been carried out according to the above conclusions to provide the technology theory base for improving and enhancing the aluminum alloy welding joint performances.
high frequency pulse acoustic emission cavitation microstructures
Yan Sibo Song Yonglun Zhang Jun Bai Lilai
Beijing University of Technology, Beijing, China
国际会议
合肥
英文
27-31
2011-09-23（万方平台首次上网日期，不代表论文的发表时间）