Effect of processing on Density of Mg-6Zn-0.5Y Alloy
Effect of different melt temperatures, holding time, cooling rate and C2Cl6 degasser treatment on the density of Mg-6Zn-0.5Y alloy was studied. The experimental results indicated that the density of RPT samples decreased with increasing of melt temperature, which indicating that the hydrogen content increased with the increment of temperature. And the results also showed that the density of RPT samples rapidly decreased at first and then decreased slowly with increasing of holding time, suggesting that the hydrogen content rapidly increased at first and then reached a saturated state with increasing of holding time. When cooling rate increased, the density of ingots gradually increased at the same melt temperature. When the melt was treated by 1％, 3％ and 5％ C2Cl6 degasser at 720℃, the density of ingots gradually increased compared with the ingot without treatment by C2Cl6 degasser. The density of ingot reached the maximum value when C2Cl6 degasser content was 3％, i.e, the ingot density value increased from 1.8649g.cm-3 of the untreated sample to 1.8774g.cm-3 of the sample treated by 3％ C2Cl6 degasser, indicating that 3％ C2Cl6 degasser treatment has an optimum degassing effect.
Mg-6Zn-0.5Y alloy hydrogen content density C2Cl6 degasser
JIA Zheng ZHANG Zhi-Qiang LE Qi-Chi CUI Jian-Zhong
Key Lab of Electromagnetic Processing of Materials, Ministry of Education,Northeastern University, S Key Lab of Electromagnetic Processing of Materials, Ministry of Education, Northeastern University,
国际会议
11th IUMRS International Conference in Asia(第十一届国际材联亚洲材料大会 IUMRS-ICA 2010)
青岛
英文
57-62
2010-09-25（万方平台首次上网日期，不代表论文的发表时间）