Effect of different dielectric constant solvents addition on PEDOT-PSS conductive polymer and its application
This paper investigates the physical properties of conductive paste which is used for print engineering. The conductivity of poly (3,4-ethylenedioxythiophene) (PEDOT) doped with poly(4-styrenesulfonate) (PSS) containing various organic solvents was measured. The different dielectric constant solvents are isopropanol, N-methyl-2-pyrrolidone, N,N-dimethyl acetamide, dimethyl sulfoxide with different concentration. After drying, they were prepared many kinds of films. It was found that an addition of organic solvent lowered the resistance by two or three orders of magnitude when the concentration is 25wt％ , among them the larger dielectric constant solvent has the best surface conductivity, the magnitude is about 7.03×10-1 S/cm, and then we blend every two solvents by 25wt％ concentration, prepared six blend films. Among them has the best effect, the magnitude is about 1.94×10-1S/cm. All kind of PEDOT/PSS films have been studied using four point probe conductive meter, X-ray diffractometry (XRD), fourier transform infrared (FTIR), thermogravimetric analysis(TGA) in order to discuss the surface conductivity, the crystallinity, the chemical structure and the thermal properties of the PEDOT/PSS film. Conducting PEDOT/PSS-IPA/DMSO solution mix with polymethyl-methacrylate (PMMA) resin to coat hydrophobic fabrics, which can be used for the dissipation of electrostatic charge.
Poly(3 4-ethylenedioxythiophene)/Poly(4-styrenesulfonate Surface resistance Hydrophobic fabrics Electrostatic discharge Dielectric constant
Lee Chin-Jung Tsai I-Shou
Graduate Institute of Textile Engineering, Feng Chia University, Taichung,Taiwan Dept. of Polymer Ma Graduate Institute of Textile Engineering, Feng Chia University, Taichung,Taiwan
国际会议
11th IUMRS International Conference in Asia(第十一届国际材联亚洲材料大会 IUMRS-ICA 2010)
青岛
英文
625-633
2010-09-25（万方平台首次上网日期，不代表论文的发表时间）