A Theoretical Study of the Internal Forces in a Hydraulic Vane Pump with Hypertrochoid Curve in the Inner Surface of Its Stator
In the latest our works,Performance of a fixed displacement-hydraulic balance vane pump, theoretically and practically was studied by application of the basic hypertrochoid curve in the inner surface of its stator.Also the effect of the inertia force of the vanes on the performance of the pump with this curve was studied.This study presents a theoretical analysis of the internal pressure distribution in the pump,and of the resulting forces and torques applied to its components.This analysis is essential to the study of the pump dynamics and control,the pump design,and selection of the pump bearings.These forces are shown to be a function of the line pressure,the shaft rotational speed,the fluid bulk modulus,the fluid viscosity,and the design geometry.These forces are composed of two components: a continuous component due to the exposure of chambers to the line port,and an intermittent component due to a hydraulic lock phenomenon.
Hydraulic balance vane pump Hypertrochoid curve Stator Internal force Pressure variation
M.Ebrahimi S.A.Jazayeri
Department of Mechanical Engineering,Ayatollah Amoli Branch,Islamic Azad University,Amol,Iran K.N.Toosi University of Technology,Mollasadra Street,Vanak Square,Tehran,Iran
国际会议
2012 2nd International Conference on Advanced Material Research(2012 第二届先进材料研究国际会议 ICAMR2012)
成都
英文
301-304
2012-01-07（万方平台首次上网日期，不代表论文的发表时间）