Assessment on Screw Fixing Failure Mode for Kitchen Cabinet Particleboard

摘要：

An observation during screw fixing activities on kitchen cabinet installation was carried out.In collaboration with Signature Kitchen Ptd.Ltd.,a kitchen cabinet manufacturer in Malaysia,twenty-eight (28)houses in Kelang Valley,Malaysia were selected for the study.Almost all of the sites selected have shown some damages of the particleboard during the screw fixing activities.Generally,there were cracks,chip-off or swelling occurred in between the panel surface and the screw head edges.The damages observed on the screw joint during installation are in the form of split holes,loose holes and delamination.All damages then were identified for its type of failure mode especially at the screw-driving slot and particleboard surface.Six type of failure mode were identified,documented and discussed.

关键词： Kitchen cabinet Failure Mode Screw insertion Particleboard

作者: Faiah Abu Mansur Ahmad

作者单位: Faculty of Applied Science,Universiti Teknologi MARA UiTM Shah Alam,Malaysia

会议类型: 国际会议

会议名称: 2012 2nd International Conference on Advanced Material Research(2012 第二届先进材料研究国际会议 ICAMR2012)

会议地点: 成都

会议语种:英文

页码: 577-581

在线出版日期: 2012-01-07（万方平台首次上网日期，不代表论文的发表时间）