Research on Producing Low-power Low-voltage DC Power Supply with High-voltage Power Bus
The online monitoring equipment installed on the high-voltage power bus is supported by reliable and stable DC power, which cannot be obtained from industrial low-voltage AC power or chemical battery.This paper presents a circuit based on the principle of electromagnetic induction to obtain low-voltage low-power DC power supply from high voltage power bus.The circuit consists of energy-acquired coil, the rectifier and regulator circuit, and the shunt coils.This power supply can work with small current in the bus, also it can output stable DC voltage in the case of large current in the bus by starting shunt coil.The experimental data indicates that the output voltage of the power supply are 3.3V and 5V, the output power is greater than 120 mW and the bus starting current is less than 5A, all these can suffice for the online monitoring equipment.
High-voltage power bus DC power supply Shunt coil
Yu-Hong Liu
Hohai University Changzhou and Jiangsu Key Laboratory of Power Transmission & Distribution Equipment Technology
国际会议
成都
英文
661-664
2011-09-27（万方平台首次上网日期，不代表论文的发表时间）