会议专题

Room and Elevated Temperature Tensile Properties of SiCf/TC17 Composite

SiQ/TC17 composite was prepared from precursor wires produced by magnetron sputtering. The results showed that full density of the composites was achieved and no porosity was detected. The fibers were arranged well forming a nearly hexagonal array. The longitudinal tensile properties of the SiCr/TC17 composite have been investigated at room and elevated temperature. The tensile strength of the composite was significantly increased,to 1717 MPa and 1341 MPa at room temperature and 500℃ respectively,due to the incorporation of SiC fiber. Scanning electron microscopy (SEM) was used to study the matrix deformation, interfacial debonding and fiber pullout. Different damage models have been obtained by comparing the stress-strain curves and fractographs of tensile samples at room and elevated temperatures. The damage processes of SiC1/ TC17 composite under tensile loading at room and elevated temperature are discussed.

Titanium matrix composites SiC fiber magnetron sputtering tensile performance

Xu ZHANG Qing YANG Yu-min WANG Jia-feng LEI Rui YANG

Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China

国际会议

The 12th World Conference Titanium(第十二届世界钛会 Ti-2011)

北京

英文

1545-1548

2011-06-19(万方平台首次上网日期,不代表论文的发表时间)