Research of stress transfer area and its length prediction of single-lap adhesive joint

摘要：

obtaining the law of stress and strain distribution of loaded adhesive joint has significant implication for joint design and its strength prediction. The dynamic FEM model of uniaxial tensile adhesive joint was established, in which strain fracture criteria is adopted. It can be observed from the FEM results that: lapped area of the joint bears shear stress primarily, the adherend areas located away from the lapped area bear steady tensile stress mainly and the adherend areas adjacent to lapped area endure tensile and shear stress simultaneously. Based on stress distribution characters, the joint was divided into three areas (lapped area, stress transfer area and uniform stress area) and an analytical model predicting the length of stress transfer areas was developed. DIC technology was applied to measure the whole field strain of the joint. It can be seen from the DIC results that the joints area division and the model of predicting the length of stress transfer length are feasible.

关键词： single-lap adhesive joint stress transfer area strain field DIC

作者: WeiPing OuYang JianPing Lin ZhiGuo Lu

作者单位: School of Mechanical Engineering,Tongji University,Shanghai 200092,China

会议类型: 国际会议

会议名称: 2010 International Conference on Material and Manufacturing Technology(2010材料与制造技术国际会议 ICMMT2010)

会议地点: 重庆

会议语种:英文

页码: 680-685

在线出版日期: 2010-09-17（万方平台首次上网日期，不代表论文的发表时间）