会议专题

Soft Sensor Modeling for the Vacuum Characteristics of a Direct Air-cooled Turbine Unit by Using Mechanism Analysis

To establish soft sensor model for the vacuum characteristics of a direct air-cooled turbine unit(DATU),the heat-transfer-unit method was applied on the based of the heat transfer mechanism model in this study.The proposed soft sensor model consists of a three-step strategY as follows.Firstly, the rule of fouling resistance(FR) ontside tube was studied, and a new algorithm was presented by using the correction eoemcient of FR ontside tube to the linear eorree60n of heat transfer coefficient. Secondly.the parallel operation characteristics of air-cooled fans were analyzed.Finally.the established soft sensor model was validated with the test data. In addition,the vacuum characteristics of the DATU were analyzed.These realize the predictive analysis of the vacuum characteristics of the DATU and lay a good foundation for the further study on the optimization Of fans in the vacuum system.

DATU Heat Transfer Coefficient Correction Vacuum Characteristics soft Sensor Model the Parallel Operation Characteristics of Air-Cooled Fans

Zhao Chun Wang Peihong Xu Yin

Southeast University of Energy & Environment,Nanjing,Jiangsu,210096,China State Nuclear Power Engineering Co.,Ltd,200233,China

国际会议

2012 International Conference on Intelligent System Design and Engineering Applications(2012年智能系统设计与工程应用国际会议 ISDEA 2012)

三亚

英文

525-528

2012-01-06(万方平台首次上网日期,不代表论文的发表时间)