Comparison of Two UV Imaging Parameters’s in the Insulator Fault Diagnosis
At present, the main parameter is the “ultraviolet flare area and “flare diameter, in order to has a contrast in the insulator for fault diagnosis, in this paper, through the water spray classification method to choice normal, good, a mark, degradation and serious aging 5 kinds of insulation of the same kind of insulator. The platform structures is in the laboratory, the pressurized are 8 kV, 10 kV and 15 kV, through the South Africa CoroCAM504 UV camera to take enough UV insulator pictures under discharge conditions, using digital image processing algorithm extracting the two parameters ,through MATLAB digital simulation, paper obtain the change of two parameters with insulating of state trend. The results show that: 1) when the insulator insulation is in good condition, flare area and flare diameter almost negligible, correspondence is better, conversely, in these two parameters are small, its always good insulator insulation. 2) when the insulator insulation comes problems, both had a tendency to rise, but flare area have a turning point “4, and flare diameter not, this shows that when insulation degradation to certain degree, flare area is not too big, and differentiate the spot diameter can be distinguished. Ultimately it provides a quantitative assessment of the basis and certain guidance for insulator in the running status .
insulators Ultraviolet imaging light spot Flare diameter Mathematical morphology Condition assessment
Lv Fang-cheng Dai Ri-jun Li Hai-de Jin Hu
Hebei Provincial Key Laboratory of Power Transmission Equipment Security Defense, North China Electr Hebei Provincial Key Laboratory of Power Transmission Equipment Security Defense, North China Electr
国际会议
三亚
英文
1400-1403
2012-01-06（万方平台首次上网日期，不代表论文的发表时间）