Research on High-Frequency Vibratory Stress Relief of Small Cr12MoV Quenched Specimens
Considering that most of the research on vibratory stress relief (VSR) is excited by low-frequency vibration at present, high-frequency-exciting VSR on small Crl2MoV quenched specimens was studied. A highfrequency vibration table system was adopted as the exciter of the VSR. To increase the vibration level, a novel vibration level amplifying device was put forward. High-frequency VSR on the same group of small Crl2MoV quenched specimens was carried out under various vibration levels. The residual stress before and after vibration was comparatively analyzed. The results showed that the high-frequency vibration had the better effect on eliminating and homogenizing the residual stress and that increasing the vibration level of high-frequency-exciting could improve the effect of high-frequency VSR.
high-frequency vibratory stress relief vibration level residual stress
Wen He Bangping Gu Jianyi Zheng Runjie Shen
The State Key Laboratory of Fluid Power Transmission and Control, Zhejiang Province Key Laboratory o Department of Control Science and Engineering, Tongji University, Shanghai 201804, China
国际会议
2011 International Conference on Mechatronics and Applied Mechanics(2011年机电一体化与应用力学国际会议 ICMAM 2011)
香港
英文
1157-1161
2011-12-27(万方平台首次上网日期,不代表论文的发表时间)