会议专题

Electro-assisted Photocatalytic Degradation of Methyl Orange on TiO2 Film Using NaCl as Electrolyte

Porous and smooth TiO2 film electrodes prepared by sol-gel method were used on methyl orange degradation by an electro-assisted photocatalytic degradation process. When using the applied potential along, there was no obvious degradation of methyl orange whether using TiO2 film electrode prepared using PEG template or not. The largest difference between the two electrodes appears at potential of 0.7 V in 0.05 mol/l NaCl solution, and the porous electrode shows better degradation activity in electro-assisted photocatalytic degradation. When NaCl concentration was 0.07 mol/l, degradation rates on porous and smooth film electrodes were 51.16% and 32.35 %, respectively. After 100 min of irradiation, 90% of the methyl orange degraded on the porous TiO2 film electrode, and 79.87% of the methyl orange degraded on the smooth TiO2 film electrode.

TiO2 film Electro-assisted Photocatalytic NaCl

Wenjie Zhang Meiling Hu Hongbo He

School of Environmental and Chemical Engineering, Shenyang Ligong University, Shenyang 110159, China School of Environmental and Chemical Engineering, Shenyang Ligong University, Shenyang 110159, China Institute of Applied Ecology, Chinese Academy of Sciences, Shenyang 110016, China

国际会议

2011 International Conference on Advanced Materials and Engineering Materials(2011先进材料与工程材料国际会议 ICAMEM 2011)

沈阳

英文

1169-1172

2011-11-22(万方平台首次上网日期,不代表论文的发表时间)