Adsorption of Cr (VI) from Simulated Wastewater onto Tannin-Immobilized Bentonite
Tannin-immobilized bentonite was used to remove Cr (VI) from electroplating wastewater in this study. The adsorption characteristics of Cr (VI) on the modified bentonite were investigated, including the effects of pH, adsorbent dosage, initial concentration of Cr (VI), temperature and on removal of Cr (VI) by conducting a series of batch adsorption experiments. The results showed that 100% of Cr (VI) removal rate was obtained since adsorbent used in this investigation were abundantly and locally available. It is concluded that tannin-immobilized bentonite is a relatively efficient, low cost and easily available adsorbent for the removal of Cr (VI) from laboratory simulated electroplating wastewater.
adsorption Cr (VI) tannin bentonite
Wen LI Yankui TANG Yutao ZENG Zhangfa TONG
School of Chemistry and Chemical Engineering, Guangxi University, Nanning, Guangxi, China, 530004 Gu Guangxi Key -Laboratory of Petrochemical Resource Processing and Process Intensification Technology, College of the Environment, Guangxi University, Nanning, Guangxi, China, 530004
国际会议
The Sixth International Conference on Waste Management and Technology(第六届固体废物管理与技术国际会议 ICWMT 6)
苏州
英文
75-79
2011-08-30(万方平台首次上网日期,不代表论文的发表时间)