The Influence of Various Sorbent Properties to Remove SO2 in Fluidized Bed Reactor
The removal of SO2 in flowing gas using the fluidized bed (F.B.) as a reactor with bed materials was conducted in dry and/or semi-dry flue gas desulfurization (F.G.D.) processes to achieve high desulfurization efficiency in this study. The effect of different properties of Ca(OH)2 and NaHCO3 as sorbents was investigated with operating variables such as molar concentration of sorbent types, water injection flow rate, different gas flow rate, and specific water volume using a bench scale plant of stainless steel column. Based on the results, the dry and/or semi-dry processes using proper types of Ca(OH)2 and NaHCO3 sorbents were newly proposed to remove SO2 from flue gas.
Flue gas desulfurization (F.G.D.) Fluidized bed (F.B.) Sorbent Bed materials
Young-Ok Park Jei-Pil Wang Yong-Ha Kim
Clean Coal Research Center,Korea Institute of Energy Research,Daejeon,305-343,Korea Department of Metallurgical Engineering,Pukyong National University,Busan,608-739,Korea Department of Chemical Engineering,Pukyong National University,Busan,608-739,Korea
国际会议
西安
英文
1065-1070
2011-08-17（万方平台首次上网日期，不代表论文的发表时间）