Stability Analysis for the Milling of Thin-walled Plates
In order to restrain the regenerative chatter and improve the processing efficiency of thin-walled parts, stability analysis for the milling of thinwalled parts should be the critical element in the whole process of analysis for thin-walled parts. This paper mainly introduces the stability analysis for the milling of thin-walled plates. The twodimensional stability lobes of milling of plate plotted, the effect of different modal parameters on the stability of milling of plate is investigated. It is shown that single mode will reduce the range of stability zone of main mode if the stability lobes of single mode are intersectant with that of main mode and the range of stability zone will be larger and the stability lobes will be regular on condition that the mode is symmetrical.
Thin-walled plate Mode superposition Damping ratio Stability Milling
Kai Wu Aijun Jiang Kai Yang
School of Mechanical Engineering, Nanjing University of Science and Technology,200 XiaoLingWei Stree Nanjing PuZhenHaiTai Brake Equipments Co., LTD., 10 Xing Long Road, Nanjing, China, 211800
国际会议
上海
英文
117-120
2011-10-21（万方平台首次上网日期，不代表论文的发表时间）