Corrosion Behavior of HRB400 Reinforcing Steel Based on Electrochemical Impedance Spectroscopy
Electrochemical impedance spectroscopy (EIS) technique was used to investigate the corrosion behavior of HRB400 reinforcing steel in Simulated Concrete Pore (SCP) solutions differently contaminated by bicarbonate ions and/or chloride ions. The corrosion kinetics parameters of the capacitance JVCPEdi, surface roughness ?o-CPE<ji and charge transfer resistance Ra of the electric double-layer capacitance of the interface of solution/HRB400 were analyzed and were compared to those of HPB235 reinforcing steel. The results show that the corrosion resistance index of HRB400 and HPB235 is increased with an increase in NaCl content to 0.1％, but that is decreased markedly for a larger NaCl content; and that of them is decreased largely with an increase in pH; the decrease extent of the corrosion resistance index of HRB400 with NaCl or pH is larger than that of HPB235; and the corrosion resistance of HRB400 is inferior to that of HPB235.
HRB400 Reinforcing Steel Corrosion Electrochemical Impedance Spectroscopy Simulated Concrete Pore Solution
Yu Ye Xu Bi Lan Lin
State Key Laboratory of Subtropical Building Science, South China University of Technology,Guangzhou Department of Material Science and Engineering, Xiamen University of Technology, Xiamen,Fujian, 3610
国际会议
上海
英文
1797-1800
2011-10-21（万方平台首次上网日期，不代表论文的发表时间）