会议专题

Thermo-Mechanical Reliability Analysis of Packageon-Package Assembly

Package on Package (PoP) is a packaging technology that one package is placed on top of another package to integrate different functionalities while still maintain same foot print size. The advantages of PoP are evident, but there are also some challenges with respect to packaging and Surface Mounting Technology (SMT). Due to the complex architecture of PoP, some reliability issues have been raised, reliability related to thermo mechanical issues are major challenges in the design of PoP. In this paper, package warpage and solder joint reliability during lead free reflow temperature, high temperature storage test and steady state temperature humidity test were investigated. After test, all components were electrically measured for continuity. The samples and their cross-sections were examined by scanning electron microscope (SEM). The intermetallic compound (IMC) thickness of solder/PCB interface and two interfaces of solder/substrate of top solder joints were measured. The results showed steady state temperature humidity test have no significant impact on mechanical reliability of PoP package. After high temperature storage test, the package emerge larger warpage and the thickness of IMC was grow comparatively large. It can be found that the thermal stress play an important role on the mechanical reliability of PoP Package. Finally, 3D finiteelement analysis (FEA) was performed, and the stress distribution under reflow process reflow temperature warpage was investigated. The results of this study can be used as a reference by original equipment manufacturers (OEMs) to estimate mechanical reliability of PoP Package.

component PoP package mechanical reliability stacked packaging package warpage

Hailong LIU Shaohua YANG

School of Electronic and Information Engineering South China University of Technology Science and Te Science and Technology Laboratory on Reliability Physics and Application of Electronic Component Gua

国际会议

2011 International Conference on Quality,Reliability,Risk,Maintenance,and Safety Engineering(2011年质量、可靠性、风险、维修性与安全性国际会议暨第二届维修工程国际学术会议 ICQR2MSE 2011)

西安

英文

209-213

2011-06-17(万方平台首次上网日期,不代表论文的发表时间)