Influence of Super-absorbent Polymer on the Growth Rate of Gas Hydrate
The growth rate of hydrate and morphology of methane hydrate formation were studied in a visual pressure cell at 5.5 MPa. The gas hydrate formation was carried out (coal mine methane (CMM) + tetrahydrofuran (THF) + sodium dodecyl sulphate (SDS) + H2O) with and without SAP. Experimental data on the hydrate growth rate and induction time were obtained for three different CMM samples. The influence of SAP on hydrate growth rate was determined. Results showed that after the addition of SAP, with the methane concentration increased in CMM, the induction time was reduced by 9 min, 10 min and 3 min, and the growth rate was shortened by 0.56 × 10-6/m3·min-1,0.53 × 10-6/m3·min-1 and 1.42× 10-6/m3·min-1, respectively. This study could be useful for the recovery of methane from CMM by forming hydrate in the chemical and mining industry.
coal mine methane separation gas hydrate induction time growth rate SAP
WU Qiang ZHANG Qiang ZHANG Baoyong
Department of Safety Engineering, Heilongjiang Institute of Science & Technology, Harbin, 150027,Chi Department of Safety Engineering, Heilongjiang Institute of Science & Technology, Harbin, 150027,Chi
国际会议
The First International Symposium on Mine Safety Science and Engineering (首届矿山安全科学与工程学术会议)
北京
英文
482-488
2011-10-27(万方平台首次上网日期,不代表论文的发表时间)