The Experiment Research of the Powder Jetting Performance for the South Africa HS Active Explosion Suppression System
The powder jetting performance and the jetting rate were analyzed, and the jetting pressure was studied under different amount of explosion suppressant agent, different length and number of high pressure nozzles as well. The technical parameters of active explosion suppression system were tested and verified. The results showed that the suppression barrier forming rate was 0.024m/ms, the roadway of 6.25m2 section area could be filled in 100ms after the system was triggered. The longer the side distance was, the quicker the jetting pressure released. The formulation was obtained to calculate the amount of explosion suppressant agent for the unit area. The jetting rate was higher than 90% which can enssure a satisfied explosion suppression effect.
gas active explosion suppression powder jetting performance suppression barrier jetting rate
Wang Jun-feng Wu Jian-ming Yu sheng Helmuth Spath
College of Mining Engineering, Taiyuan University of Technology, Taiyuan 030024, China Shanxi Lanhua HS Suppression System Co.,t Lt., Jincheng, 048000, China
国际会议
The First International Symposium on Mine Safety Science and Engineering (首届矿山安全科学与工程学术会议)
北京
英文
403-411
2011-10-27(万方平台首次上网日期,不代表论文的发表时间)