DYNAMICAL ANALYSIS AND SIMULATION OF RV REDUCER
Based on Newtons second law and the generalized coordinates method.a 25-DOF dynamical of RV250A II model by lumped-parameter method was formulated, solved the dynamic equation by Matlab software, results shows that the nature frequency of the reducer will changing at a tiny range with the turning of cycloid.The key nature frequency focus on 172, 801, 2378, 2919, 9801 and 12605Hz, which should be carefully to avoid reasonance happen.On the base of multi-body dynamical theory and the worrking principle of RV reducer, by appropriate simplification, defined the meshing between the involutes planetary gears and the sun gear, the cycloid gear and the pin wheels both as high pair, solid connect the three planet gears and the three crankshafts, define the relation between the three crank shafts and the two cycloid gears as revolving joint, paper established the multi-body dynamics virtual prototype for the RV reducer, with the simulation and the analysis of displacements, velocity, acceleration and force for the key parts of RV reducer, paper investgated the motion, force and vibration rule of crankshaft, cycloid wheel and needle tooth.Simulation results verified that RV reducer drive smoothly, has good load bearing and can working stably with high precision.
RV reducer dynamical Virtual prototype simulation
ZHANG Yinghui HE Weidong
School of Mechanical Engineering DaLian JiaoTong University
国际会议
3rd International Conference on Mechanical and Electrical Technology(ICMET2011) (2011第三届机械与电气技术国际会议)
大连
英文
121-126
2011-08-26（万方平台首次上网日期，不代表论文的发表时间）