Design of Tomato Color Sorting Multi-channel Real-time Data Acquisition and Processing System Based on FPGA
In order to meet the tomato color sorting system with the requirements of mulrl- channel data acquisition and real-time processing, firstly, a multi-channel color digital acquisition and processing technique program based on FPGA were proposed. Then, a multichannel data acquisition and real-time parallel processing system was built. The RGB color sensors were slected as detection components and the FPGA chip EP1C3T144C8 was sleeted as a core of data acquisition and processing. Meanwhile, ports of signal acquisition and the solenoid valve control were adopted a two-way analog switch HC4051 for saving I/O ports of FPGA. Thirdly, under the modular design and module reuse principles, we developed all modules with VHDL Language in QuartusII development environment Finally, RTL and time sequence simulation for the system were done. The results showed that the connections between the modules accord with control logics. The performance of system time sequencev are good, which can meet with the requirements of realtime processing of tomato color sorting. On these bases, we also conducted a tomato sorting test verification. The results showed that the average accuracy of sorting is 98.70％ and coefficient of variation is 0.01. This results can meet requirements of production.
FPGA VHGL Multi-channel,Real-time Tomato Color Sorting
Zhang Ruoyu Kan Za Jiang Yinlan
Machinery and Electricity Engineering College of Shihezi University, Shihezi, China
国际会议
Third International Symposium on Information Science and Engineering(第三届信息科学与工程国际会议 ISISE 2010)
上海
英文
207-212
2010-12-24（万方平台首次上网日期，不代表论文的发表时间）