Study on Fabrication and Thermal Analysis of Porous Silicon Nanoenergetic Materials
In this paper, the thickness of porous silicon which was fabricated by electrochemical method was about 100μm, and the average diameter of composed pores was about 4.3nm. According to the related data, the specific surface area was calculated, and it was up to 587m2/g. Depending on ultrasonic wave, suitable oxidants was immerged into porous silicon to prepare nanoenergetic materials，which can arise strongly explode under the condition of heat pulse at the temperature of 450℃-470℃ in air. The porous silicon nano-energetic materials were tested by thermal analysis technology, and the results showed the exothermal temperature was lower than the pure oxidants. So it has a potency to fabricate high nanoenergetic materials.
WANG Shouxu YANG Cheng SHEN Ruiqi YE Yinghua HU Yan
School of Chemical Engineering,Nanjing University of Science and Technology,Nanjing 210094,China
国际会议
2011 International Autumn Seminar on Propellants,Explosives and Pyrotechnics(2011国际推进剂、炸药、烟火技术秋季研讨会)
南京
英文
315-321
2011-09-20（万方平台首次上网日期，不代表论文的发表时间）