WEC Condition Monitoring Based on SCADA Data Analysis
Condition Monitoring (CM)can greatly reduce the maintenance cost for a Wind Energy Converter (WEC).In this paper,history data of Supervisory Control and Data Acquisition (SCADA)system is analyzed to detect the incipient failure of WEC generator bearing.A new condition monitoring method based on the Nonlinear State Estimate Technique (NSET)is proposed.NSET is used to construct the normal behavior model of the generator bearing temperature.When the generator bearing has an incipient failure,the residuals between NSET model estimates and the measured generator bearing temperature will become significant.When the residual exceeds the predefined thresholds,an incipient failure is flagged.Analysis of a manual drift added on the historical SCADA data for a WEC generator bearing demonstrates the effectiveness of this new condition monitoring method.
GUO Peng
School of Control and Computer Engineering,North China Electric Power University,Beijing 102206,P.R.China Institute for Energy and Environment,University of Strathclyde,Glasgow,UK,G1 1XW
国际会议
The 30th Chinese Control Conference(第三十届中国控制会议)
烟台
英文
1-5
2011-07-01（万方平台首次上网日期，不代表论文的发表时间）