Simulation of the temperature, stress, strain field in aluminum thin-gauge high-speed casting
Based on the analyses of aluminum melt solidification and heat transfer during the process of twin-roll casting, a coupling mathematical model of thin-gauge high-speed casting was developed, which included the casting roller shell. At the same time, FEM was adopted to solve the coupling model. The temperature field, thermal stress field and strain field of aluminum melt in casting zone were simulated by this model. When the casting velocity is 7m/min, and the thickness of strip is 2 mm, in the melt zone, the temperature of melt decreases rapidly as it approaches the rollers; the surface stress of strip is larger than the central stress; In the liquid zone and mushy zone, thermal stress is relatively small; in rolling zone, thermal stress is much larger than in the former two zones, and gradually increases along exports, then gradually decreases after the peak; the outsurface strain of the casting strip is larger than the inner strain, and the thermal stress gradually increases along exports.
LIU Xiaobo Wu Dunsheng
Aeronautics ＆Mechanical Engineering College,Nanchang Hangkong University, Nanchang 330063, China School of Mechanical and Electrical Engineering, Jiangxi University of Science and Technology, Ganzh
国际会议
桂林
英文
1-5
2010-11-16（万方平台首次上网日期，不代表论文的发表时间）